From the

Drill Library

Learn Drills.

Build Skills.

D-108

MIXING SPEED & ACCURACY

by Frank Garcia

HandgunDrills.com ♦ Concealed Carry Practice Drills ♦ To Build Your Skills

Find Drills to Build the Skills You Need Now!  Filter the Drill Library for drills with any combination of these 10 attributes.

Practice with a purpose, what you learn in training, from the skill level you’re at, with the time and ammo you have.

Range Compatible

Outdoor Only

Yardage

5 – 15 Yards

Rounds Required

6 Rounds

Shot Accuracy Ratings

0.9 to 1.9

Multiple Targets

Multiple Grips

X

Movement/ Cover

X

Reload/ Malfunction

X

Shot Sequencing

X

Decision-Making

X

Drill Set-Up at Start with Target(s)

Use (2) each of LT-001 (IDPA) & PT-008 (8″ dot) small format targets.

HandgunDrills.com offers free downloads of the Small Format (8.5″ x 11″)  target images for printing at home. Large Format targets are available in the Store.

Stages for a drill to train concealed carry skills at the range

Drill Instructions by Stage

ACCURACY is a HandgunDrills.com standardized difficulty rating to describe the accuracy required to make any shot. The rating is calculated as the “distance in yards” divided by the “diameter in inches of the target zone”. Example: A 7″ target from 7 yards is a 1.0 rating and is used by many as an accuracy level for concealed carry competency drill tests. So for example, a 15″ target zone at 15 yards and a 5″ target zone at 5 yards also have an accuracy rating of 1.0. The higher the accuracy rating the harder the shot and the lower the rating the easier the shot. With this system you can easily estimate the accuracy required for any shot. (Note: All non-circular target zones are normalized to their equivalent circular target with a diameter of the same area.)

Scoring the Drill

A MISS is a shot out of the scoring zone (Body -0 or 8″ DOT/plate). Touching the line/edge is a HIT.

Drill Performance Standard

Drill standard is 6 hits. Record time for reference.

Shooting the Drill

Set-up IDPA targets at 45° angle on same side or opposite sides (as shown). Don’t miss the plate. The objective is to center-punch the close-in IDPA targets at light-speed, then refocus on the front sight and down the plate with a single shot only. Repeat until you can execute the drill without a miss.

Notes

 

This drill is presented by HandgunDrills.com. When known, the name of the drill designer is credited. All drills are presented in a standard format here and on Drill Cards. HandgunDrills.com is not responsible for the use of these drills or any consequences that occur from that use. Practicing drills is dangerous and should always be done under the supervision and guidance of a professional Instructor. By using this content, including the printed form, user agrees to waive all liability that may occur from the use of these drills and hold HandgunDrills.com harmless.